Application Software Package as a Means of Professional Training of Sewing Industry Specialists in the Conditions of the University

Authors

  • Nataliia Boksha Mukachevo state university
  • Oksana Tovkanets Doctor of Pedagogical Sciences, Associate Professor of General Pedagogy and Higher School Pedagogy, Uzhhorod National University, Uzhhorod, Ukraine
  • Daryna Ziablovska Postgraduate student, Department of Theory and Methods of Primary Education, Senior Lecturer, Department of Engineering, Technology and Professional Education, Mukachevo State University, Mukachevo, Ukraine
  • Anna Tovkanets Doctor of Pedagogical Sciences, Professor, Head of the Department of Theory and Methods of Primary Education, Mukachevo State University, Mukachevo, Ukraine

DOI:

https://doi.org/10.18662/rrem/14.3/603

Keywords:

application software packages, professional training, garment industry specialists, university

Abstract

The article is devoted to the application software package usage as a means of professional training of sewing industry specialists in the conditions of the university. It is established that the information competence formation of future sewing industry engineers should be carried out taking into account the peculiarities of the Information and Communication Technologies (ICT) usage at modern enterprises. The content peculiar features of information training of future sewing industry specialists have been studied based on of the analysis of educational curricula developed at Mukachevo State University. Foreign experience in the ICT usage in higher education has also been considered on the example of the Technical University of Liberec, Czech Republic.

The following scientific methods as systematization, analysis, generalization of theoretical sources and statistical data, structuring of pedagogical information on designing the content of educational curricula as well as the comparative analysis of foreign experience in the ICT usage in higher education have been applied to conduct the research.

The authors suggest that the development of own information products by the higher educational establishment, which are used within professionally-oriented disciplines are among the ways to increase the ICT competencies of future specialists in the garment industry.

Thorough study of the peculiarities of the application software packages usage during the training and production and engineering practices in the conditions of garment production also improve the level of information competence of students.

References

Alexander Dubcek University of Trencin. (2020). Faculty of Industrial Technology. Alexander Dubcek University of Trencin http://fpt.tnuni.sk

Bissel, C. C. (2002). Supporting student projects at a distance through ICT: The UK Open University approach. European Journal of Engineering Education, 27(1), 5-12. https://doi.org/10.1080/03043790110100155

Blog Texprocess. (2019, May 24). Thinking in 3D from outset. Texprocess. https://www.texprocess-blog.com/en/thinking-in-3d-from-the-outset

Dopper, S. M., & Sjoer, E. (2004). Implementing formative assessment in engineering education: the use of the online assessment system Etude. European Journal of Engineering Education, 29(2), 259-266 https://doi.org/10.1080/0304379032000157187

Froyd, J. E., Wankat, P. C., & Smith, K. A. (2012). Five Major Shifts in 100 Years of Engineering Education. Proceedings of the IEEE (Special Centennial Issue), 1344–1360. https://www.researchgate.net/publication/260648443_Five_Major_Shifts_in_100_Years_of_Engineering_Education

Gibson, I. S., O'Reilly, C., & Hughes, M. (2002). Integration of ICT within a project-based learning environment. European Journal of Engineering Education, 27(1), 21-30. https://doi.org/10.1080/03043790110100182

Hartikainen, S., Rintala, H., Pylväs, L., & Nokelainen, P. (2019). The Concept of Active Learning and the Measurement of Learning Outcomes: A Review of Research in Engineering Higher Education. Education Sciences, 9(4), 276. https://doi.org/10.3390/educsci9040276

Heap, N. W., Kear, K. L., & Bissel, C. C. (2004). An overview of ICT-based assessment for engineering education. European Journal of Engineering Education, 29(2), 241-250. https://doi.org/10.1080/0304379032000157204

Höhne, G., & Henkel, V. (2004). Application of multimedia in engineering design education. European Journal of Engineering Education Volume 29(1), 87-96 . https://doi.org/10.1080/0304379032000129278

Holovne upravlinnia statystyky u Zakarpatskii oblasti [The head office of statistics in the Transcarpathian region] (2019, June 6). Lehka promyslovist oblasti [Light industry]. http://www.uz.ukrstat.gov.ua/news/2019/press/press1395

Ivanova, I. I. (2004). Systema kompiuternoho modelyrovanyia v proffesyonalnom obrazovanyy konstruktorov-modelerov [Computer modeling system in professional education of fashion-designer], (Dyss. kand. ped. nauk). Toliatty [Diss. Candidate of Pedagogical Sciences] [Unpublished doctoral dissertation]. Togliatti University.

Kolosnichenko, M., Pashkevich, K., & Ostapenko, N. (2015). Informatsiini tekhnolohii navchannia – shliakh do pidhotovky konkurentozdatnykh fakhivtsiv z dyzainu odiahu [Information technologies of teaching – path to preparation of competitive specialists of clothes design]. Visnyk Kyivskoho natsionalnoho universytetu tekhnolohii ta dyzainu, seriia “Ekonomichni nauky” [Bulletin of Kyiv National University of Technology and Design, series “Economic Sciences ”], 182-188.

Kolosnichenko, M.V., Shcherban, V. Y., & Protsyk, K. L. (2010). Kompiuterne proektuvannia odiahu. [Computer designing of clothes]. Kyiv, Osvita Ukrainy [Education of Ukraine].

Lorens, A., Berbegal-Mirabent, J., & Llinàs-Audet, X. (2017) Aligning professional skills and active learning methods: an application for information and communications technology engineering. European Journal of Engineering Education, 42(4), 382-395. https://doi.org/10.1080/03043797.2016.1189880

Lucke,T., Dunn, P. K., & Christie, M. (2017). Activating learning in engineering education using ICT and the concept of “Flipping the classroom”. European Journal of Engineering Education, 42(1), 45-57. https://doi.org/10.1080/03043797.2016.1201460

Memetova, S. E. (2011). Sravnitelnyiy analiz vozmozhnostey programmnyih moduley SAPR «Tehnolog» dlya proektirovaniya odezhdyi. [A comparative analysis of the capabilities of CAD «Technology» software modules for designing clothes]Uchenyie zapiski Kryimskogo inzhenerno-pedagogicheskogo universiteta [Scientific notes of the Crimean Engineering and Pedagogical University], 27, 157-161. http://nbuv.gov.ua/UJRN/VzKipu_2011_27_37

Mukachevo State University. (2020). Osvitni prohramy [Educational programs]. Mukachevo State University. https://msu.edu.ua/osvitni-programi

Nguyen, H., Wu, L., Fischer, C., Washington, G., & Warschauer, M. (2020). Increasing success in college: Examining the impact of a project-based introductory engineering course. Journal of Engineering Education, 109, 384– 401. https://doi.org/10.1002/jee.20319

Perminova, A.V. (2011). Rozvytok metodyk navchannia maibutnikh inzheneriv -pedahohiv shveinoho profiliu u druhii polovyni XX stolittia [Development of methods of training future engineers - teachers of sewing profile in the second half of the twentieth century]. (Dys. kand. ped. nauk) [(Diss. Candidate of Pedagogical Sciences)] [Unpublished doctoral dissertation]. Kharkiv University.

Simões, J. A., Revlas, C., & Moreira, R. (2010). Project-based teaching–learning computer-aided engineering tools, European Journal of Engineering Education, 29(1), 147-161. https://doi.org/10.1080/0304379032000129223

Skvarok, M. Yu. (2015). Profesiina pidhotovka maibutnikh inzheneriv-pedahohiv do proektuvannia odiahu zasobamy informatsiinykh tekhnolohii [Professional training of future engineers-teachers for designing clothes by means of information technologies]. (Dys. kand. ped. nauk) [(Diss. Candidate of Pedagogical Sciences] [Unpublished doctoral dissertation]. Drohobych University.

Streveler, R. A., & Menekse, M. (2017). Taking a Closer Look at Active Learning. Journal of Engineering Education, 106, 186-190 https://doi.org/10.1002/jee.2016

Technical University of Liberec. (2020). Faculty of Textile Engineering. Technical University of Liberec. http://www.ft.tul.cz

Vera, C., Félez, J., Cobos, J. A., Sánchez-Naranjo, M. J., & Pinto, G. (2006). Experiences in education innovation: developing tools in support of active learning. European Journal of Engineering Education, 31(2), 227-236. https://doi.org/10.1080/03043790600567969

Yelamarthi, K., & Drake, E. (2015). A Flipped First-Year Digital Circuits Course for Engineering and Technology Students. EEE Transactions on Education, 58(3), 179-186. https://doi.org/10.1109/TE.2014.2356174

Downloads

Published

2022-09-02

How to Cite

Boksha, N., Tovkanets, O., Ziablovska, D., & Tovkanets, A. (2022). Application Software Package as a Means of Professional Training of Sewing Industry Specialists in the Conditions of the University. Revista Romaneasca Pentru Educatie Multidimensionala, 14(3), 164-179. https://doi.org/10.18662/rrem/14.3/603

Issue

Vol. 14 No. 3 (2022): Revista Romaneasca pentru Educatie Multidimensionala

Section

Research Articles

License

Copyright (c) 2022 The Authors & LUMEN Publishing House

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant this journalright of first publication, with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work, with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g. post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g. in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as an earlier and greater citation of published work (See The Effect of Open Access).

Revista Romaneasca pentru Educatie Multidimensionala Journal has an Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

CC_BY_NC_ND